Estima Motoring Community
News:
 
*
Welcome, Guest. Please login or register. May 15, 2012, 01:29:37 AM


Login with username, password and session length


Don't forget to have a look at our website at www.estima-motoring.co.uk
Pages: [1]   Go Down
  Print  
Author Topic: electric window motor help pls  (Read 319 times)
0 Members and 1 Guest are viewing this topic.
rose4765
2nd gear user
**
Offline Offline

Posts: 132


« on: February 20, 2010, 03:00:07 PM »

hi guys still having trouble with electric window motor on my townace. i've tried to remove old one today but when i tried the glass slid down and everything almost fell into the bottom of the door. i managed to put the bolts back in that hold the motor etc in place but when i try to push the glass back up it won't budge, i've tried loosening the bolts but it doesnt make any difference and now my window is nearly half open not good in this weather ! anyone got any suggestions cos all i can think of is to get a piece of perspex and tape it into the gap somehow  Sad
Logged
Swanny
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 5,495



« Reply #1 on: February 20, 2010, 03:14:15 PM »

Might be some usefulstuff in here:
http://www.yotavans.org/community/tips/manual/022_BODY.PDF
Logged
Swanny
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 5,495



« Reply #2 on: February 20, 2010, 03:21:50 PM »

You may have to manually turn the motor, or window regulator one way or another to get it back to the top or bottom:
Logged
Kernowman
Hold onto your nuts lads...this place is full of A.P.E.S.
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 11,539


Formerly known as....... PGR ポール


« Reply #3 on: February 20, 2010, 04:10:31 PM »

Could be stuck in the guides.. they are felt covered rubber and may have deformed when you pushed the window back up.
Only way is to lower it and check the are in the door frame correctly and gently slide glass back up.

Use a black bag ..cut down one side and slide it over top of door with slit on inside.. with masking tape , tape it in place along the bottom on the outside of door and where you can on inside.
Not ideal but will keep water out til you fix it.  Wink
Logged



 2012 meets season... check out MEET area for events...we might be near you.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 |SMF © 2011, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM