Estima Motoring Community
News:
 
*
Welcome, Guest. Please login or register. June 03, 2012, 08:46:43 AM


Login with username, password and session length


Don't forget to have a look at our website at www.estima-motoring.co.uk
Pages: [1]   Go Down
  Print  
Author Topic: Toyota Previa 96 - Brake Pads / Cupholder  (Read 235 times)
0 Members and 1 Guest are viewing this topic.
malcuk
1st gear user
*
Offline Offline

Posts: 15


« on: June 04, 2011, 09:58:47 AM »

Hi all.

Wondered if anyone could point me to a decent site that sells pads front and rear for my Previa ?.

Its a 96 GX model, and the Toyota parts are
Front brake pads original part no 04465-28040 and optifit part no 04465-YZZAK
 
Rear brake pads original part no 04466-28090 and optifit part no 04466-YZZC7

but these cost a bomb, and am looking for decent quality alternatives, have scoured ebay etc.

*****************

Also one thing I have been after for ages is the in dash cup holder that was equipped on the USA previa but not the UK model.

I have seen another site suggesting part numbers
55615-95D00 A1 and  55633-95D00 A1

but the official toyota number is 5560495DOO 17 costing �37.06 + VAT which is too much for my budget (

Many thanks for any help you can give, and if not, will keep looking  Smiley
Logged
Kernowman
Hold onto your nuts lads...this place is full of A.P.E.S.
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 11,565


Formerly known as....... PGR ポール


« Reply #1 on: June 04, 2011, 10:03:55 AM »

I use ebay.... Bellocat sell a lot of estima/previa spares and a few other sellers.
Contact them thru ASK QUESTION button and give your part numbers there so they can match them up..  Wink

Failing that, give GT Motors a ring.. number on banner at top of forum index page.
Logged



 2012 meets season... check out MEET area for events...we might be near you.
malcuk
1st gear user
*
Offline Offline

Posts: 15


« Reply #2 on: June 05, 2011, 09:01:27 AM »

thank you, I will go take a look, have been sending messages to ebay sellers in USA also re. cupholder, so fingers crossed !
Logged
mr mince
Brrrrooooooommm
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 5,505


Holding it together with willpower and string


WWW
« Reply #3 on: June 05, 2011, 11:04:02 AM »

thank you, I will go take a look, have been sending messages to ebay sellers in USA also re. cupholder, so fingers crossed !

Think wide body Estimas also had the cup holder and there were quite a few of them imported here, might be worth a look around the breakers see if there's any, biggest problem is I doubt most of the breakers will be able to tell the difference between a wide body Esti and  a Previa they certainly have enough trouble working out the narrow Esti is different.
Logged

Kernowman
Hold onto your nuts lads...this place is full of A.P.E.S.
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 11,565


Formerly known as....... PGR ポール


« Reply #4 on: June 05, 2011, 05:46:26 PM »

Can't remember seeing the cupholder in the M reg previa. It had a tray on passenger side.
The Estima has the pull out cupholder built into dash.. maybe you should think about trying to fit one of those in.  Undecided
Logged



 2012 meets season... check out MEET area for events...we might be near you.
ADarbon
Veggie power
Global Moderator
Hyperdrive user
*****
Offline Offline

Gender: Male
Posts: 4,962


Dentey the veg bus


« Reply #5 on: June 05, 2011, 09:02:10 PM »

you can get a pull out one for the previa some one put up a post about it some time ago
Logged

Tony the family guy

Kernowman
Hold onto your nuts lads...this place is full of A.P.E.S.
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 11,565


Formerly known as....... PGR ポール


« Reply #6 on: June 05, 2011, 09:07:44 PM »

I'd go with giving Gary at GT Motors a ring and seeing what he has in stock.  Wink
Logged



 2012 meets season... check out MEET area for events...we might be near you.
malcuk
1st gear user
*
Offline Offline

Posts: 15


« Reply #7 on: June 07, 2011, 07:32:08 AM »

Will keep trying and let you know when I get some success, thanks guys  Smiley
Logged
mr mince
Brrrrooooooommm
Silverback
Warp drive user
*******
Offline Offline

Gender: Male
Posts: 5,505


Holding it together with willpower and string


WWW
« Reply #8 on: June 07, 2011, 09:13:29 PM »

Can't remember seeing the cupholder in the M reg previa. It had a tray on passenger side.
The Estima has the pull out cupholder built into dash.. maybe you should think about trying to fit one of those in.  Undecided

Jap and American versions only as far as I remember, they obviously didn't trust us with hot stuff at the wheel Tongue
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 |SMF © 2011, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM