Estima Motoring Community
News:
 
*
Welcome, Guest. Please login or register. May 15, 2012, 01:24:05 AM


Login with username, password and session length


Don't forget to have a look at our website at www.estima-motoring.co.uk
Pages: [1]   Go Down
  Print  
Author Topic: Ay up!  (Read 82 times)
0 Members and 1 Guest are viewing this topic.
bugrump
New user

Offline Offline

Posts: 14


« on: September 24, 2011, 09:35:38 AM »

Hi guys,new to this site since I bought my 93 Emina.Since then found a few parts from the previa fit my bus,and thanks to you guys I've flushed the cooling system/flushed and changed the oil/changed the air & fuel filters.
Your site was invaluble in sorting out the rattle I aquired by changing the sads,but the vibration is still there and reckon the last owner miss aligned the shaft.Got the owners manual and some service information,but can't find any links to aligning the auxilary shaft.
Any clues anyone?
FYO if you change your indicator bulbs with led versions your indicator relay goes into overtime! Huh?
Logged
Dazzler
Global Moderator
Hyperdrive user
*****
Offline Offline

Gender: Male
Posts: 4,329


« Reply #1 on: September 24, 2011, 09:56:00 AM »

Welcome to the site chap, and I have the same problem.Changed the SADS last year and they've gone again despite also changing the front Engine mounts. Let me know if you find anything of use concerning alignment. Was thinking of going to a prop specialist at some point.
All the best Daz
Logged
bugrump
New user

Offline Offline

Posts: 14


« Reply #2 on: September 24, 2011, 10:01:29 AM »

No probs,will do.
I'm pretty certain someone here will have come across this one.
cheers Bug
Logged
ADarbon
Veggie power
Global Moderator
Hyperdrive user
*****
Offline Offline

Gender: Male
Posts: 4,890


Dentey the veg bus


« Reply #3 on: September 24, 2011, 12:40:48 PM »

Make sure that you put the sads on right i got the front one wrong and the bit that sticks out wasn't in the slots. I need to re line mine its trial and error
undo the bottom bolt of the horse shoe the whole front unit will drop. you need some one to pull it up so it looks 90 degree to the shaft and tighten the nut at that point then run the engine see if it sorted if no then move it forward and back till you get it. before you spend hours on that check the condition of your engine mounts if there worn its never gonna go right.
Logged

Tony the family guy
ADarbon
Veggie power
Global Moderator
Hyperdrive user
*****
Offline Offline

Gender: Male
Posts: 4,890


Dentey the veg bus


« Reply #4 on: September 24, 2011, 12:43:04 PM »

welcome aboard
Logged

Tony the family guy
bugrump
New user

Offline Offline

Posts: 14


« Reply #5 on: September 24, 2011, 03:20:26 PM »

Cheers Adorbon,
had a look at the engine mount rubbers cause I get engine shake on switch off but they seem to be ok.By that I mean I can't physicaly move the engine with a pry bar,unless there's something else I'm missing!!
But I reckon until I cure the shake I'm gonna get vibration problems regardless of what I do to the sads,getting the feeling previous owner was full of b*ll s**t!!

Cheers
Bug
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 |SMF © 2011, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM